Home  > PRODUCTS  > Ceramic tile adhesive  > 

Two Component Epoxy Resin Ceramic Tile Sealant

Two Component Epoxy Resin Ceramic Tile Sealant

Two Component Epoxy Resin Ceramic Tile Sealant

Two-component Epoxy Resin Sealant is a epoxy resin sealant for ceramic tile gap filling. It has better performance than water-based tiler sealer. The advantage is smooth as ceramic after cured, good hardness,wear-resistant, stain-resistant, and easy to clean.

1. Excellent mildew-proof, waterproof, anti-infiltration, anti-yellowing;

2. Pure color, and rich color;

3. Long lasting stain resistance and chemical resistance;

4. Green and environment friendly;

5. Flexible, and easy to maintain.


Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Related Products

Basic Uses:

1. All kinds of cabinets aperture, window, furniture, etc.

2. All kinds of edges of kitchen, toilet, also can be used to paste all kinds of hard materials.

3. Bathtub, shower room, glass

partition,implement, basin, mesa and basins of guesthouse.

4. Hotel, family, such as the installation of sanitary ware, waterproof, plugging and decoration processing.


Package:

400ml / dual-cartridge, 20 pieces / carton


Tips of Application

1. In case of rainy weather or wet construction, please do not apply for construction until the environment is dry. Because the cement, tile adhesive and other materials in the gap of the tile will play an alkaline substance in a humid environment, which will affect the performance of the construction of the component A, and even make the component A discolor and turn white.


2. If the tile is cleaned with an acidic or alkaline cleaner before the construction, clean the tile gap before the construction. When the tile gap is dried, apply for a small area trial. If it's work well, apply for large area.


3. When a new glue nozzle is applied, the beginning 30cm sealant is not usable. If it is forcibly used, it may not be cured.


4. The construction of the this sealant is recommended to be used once. If the gelling process is stopped for a long time, the sealant will be dried. At this time, a new rubber nozzle needs to be replaced. When applying a new nozzle, the beginning 30cm sealant is not usable.


5. To achieve a good performance, the gap width shall be equal to or larger than 1.5mm, and the gap depth is equal to or larger 3mm.


6. If the component B containing a large number of flashes, it is recommended for use in places where the gap width is 2 mm and the light is good.


Color

Viscosity (CPS)(25°)

Operation  time (100g)

Curing time

(25℃/100g)

Shear strength

Temperature

Shelf time

(25℃)

 

Part A:Different colors

A:Paste

 

 

40 minutes

2 hours for surface dry

 

 

70-80MPa

 

 

-50°to +100°

 

18months

Part B:Milky to clear

B:Paste

8-12 hours for totally dry


Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...